Black 7mm Copper Core Tinned Ignition Lead Kit 3 Meters Ht Kit Car Older Cars
Black 7mm Copper Core Tinned Ignition Lead Kit 3 Meters Ht Kit Car Older Cars

Black 7mm Copper Core Tinned Ignition Lead Kit 3 Meters Ht Kit Car Older Cars

£22.22

This ignition lead kit will contain all brand new items it is to make your own 4cyl ignition lead set to how you need them you will get all that's in the ad photo all brand new parts 3 meters of black copper core tinned 7mm lead 

4 x spark plug boots 90"degree / 4 x spark plug terminals 90"degree / 6 x brass split washers / 5 x short screw acorn caps / 1 x long screw acorn cap 1 x ignition lead holder 

This ignition lead kit covers all the older cars and even other things but you just build to suit your car.

This is a top quality copper core lead it has a very soft texture and flexibility to it please read

IGNITION LEAD TECHNICAL SPECIFICATION CONSTRUCTION

TEMPERATURE PERFORMANCE 250 Deg c max 220 Deg c operating normal cable rating 35kv
INSULATION High temperature silicone rubber insulation (white)
RE-ENFORCEMENT Helical fiberglass braiding (4 ends)
SHEATH High temperature silicone rubber sheath (black)
CONDUCTOR 19 strands of 0.25mm tinned copper cor (1mm sq nom)

Please make sure this is the correct application you need

GAP SETTINGS / INSTALLATION for your spark plug

for electrode gap refer to makers manual first install plugs finger tight then tighten with a plug spanner

This is a top quality copper core lead it has a very soft texture and flexibility to it please read

IGNITION LEAD TECHNICAL SPECIFICATION CONSTRUCTION

TEMPERATURE PERFORMANCE 250 Deg c max 220 Deg c operating normal cable rating 35kv
INSULATION High temperature silicone rubber insulation (white)
RE-ENFORCEMENT Helical fiberglass braiding (4 ends)
SHEATH High temperature silicone rubber sheath (black)
CONDUCTOR 19 strands of 0.25mm tinned copper cor (1mm sq nom)

IGNITION LEAD TECHNICAL SPECIFICATION CONSTRUCTION

TEMPERATURE PERFORMANCE 250 Deg c max 220 Deg c operating normal cable rating 35kv
INSULATION High temperature silicone rubber insulation (white)
RE-ENFORCEMENT Helical fiberglass braiding (4 ends)
SHEATH High temperature silicone rubber sheath (black)
CONDUCTOR 19 strands of 0.25mm tinned copper cor (1mm sq nom)
Please make sure this is the correct application you need

GAP SETTINGS / INSTALLATION for your spark plug

for electrode gap refer to makers manual first install plugs finger tight then tighten with a plug spanner

SKU: 125476621273

Hello and thank you for looking in my shop and listings. My name is Anthony and i have been working within the auto triad for some 30 years. I do have a love for the Retro cars. I only hand build quality Ignition Leads so you can have 100% confidence in your order "I do not hold stock of leads i build them once the order has been placed". If you don't see what your looking for drop me an e-mail and i will do my up most to help you. I'm listing more each day.

Regarding a one of ignition lead set this is something i do like to do but i always feel like having a chat on the phone just to make sure i have all the information so you get the lead set you need..

A premium brand ignition cable for use where high performance is essential. The core uses a fiberglass and Kevlar® base onto which is extruded a Wire wound conductor cable which is tightly wound with a stainless steel resistance wire bound with a conductive lacquer. This design ensures maximum spark quality with virtually zero voltage loss while still maintaining an excellent level of EMI & RSI suppression. With a resistance range of 5.6kOhm per meter (nom). They provide superior reliability and ultimate performance at all times, even under the most severe conditions.

The ignition leads deliver high performance over a wide temperature range. They have a waterproof seal around the spark plug and are resistant to oil, water and under-bonnet corrosive materials.Ignition leads connect the distributor to the spark plugs and therefore form an important part of the overall car engine ignition system. Ignition leads or cables carry the High Tension Voltage from the ignition coil that is required for the spark plugs to ignite the air/fuel mixture. It's important that the HT Voltage is not allowed to escape before reaching the spark plugs. Faulty ignition leads, due to perished, torn or chaffed cable insulation and dirty cable connectors are common causes of rough running, misfires, high fuel consumption and MOT emissions failures.

FITTING INSTRUCTIONS INFORMATION ..NEVER try to remove the ignition leads when the engine is running or when the ignition is on or hot..... To remove the ignition leads grip the insulator ( spark plug boot ) twist to brake the seal and pull straight ( NEVER PULL / REMOVE ON THE IGNITION LEAD ) Change one lead at a time starting with the shortest first Repeat this sequence until all the leads have been changed   ..... Ensure all terminals and connectors are free from oil / water / dirt be safe just wipe them..... A good terminal connection is critical they need a good connection. 

Items are generally posted out the next working day after receipt of payment although this can take up to 3 working days if at the weekend. Please do not ask me if you can pay at the end of the week, month etc as you will not receive an answer I do not offer credit. I must receive cleared payment within 3 days of the auction finishing; otherwise I will report to E-bay and leave negative feedback accordingly.

My feedback can only tell the truth I always keep proof of posting receipts so if your item gets lost in the post i will send you this receipt so you can claim from the royal mail directly. I will back you up in such a claim and if for any reason you are not 100% happy with your purchase please just contact me and i will be more than happy to sort your problems out thank you

All orders will normally be built / dispatched within 1 to 2 business working days after confirmation of payment. Orders are not processed for shipment on weekends and bank holidays as i also have a family.

THE POSTAL CHARGE IS FOR A SIGNATURE UPON DELIVERY SO THEY DON'T GO MISSING

PLEASE NOTE POSTAGE COSTS ARE NOT JUST THE PRICE THE POST OFFICE CHARGE FOR DELIVERY. IT INCLUDES PACKAGING. SO PLEASE WHEN LEAVING FEEDBACK DON’T GIVE ME A LOW RATING FOR DELIVERY COSTS, IF YOU THINK THE DELIVERY COST IS UNREASONABLE DON’T BID.

COLLECTIONS ARE AVAILABLE

If you wish to protect yourself from the small risk of something getting lost or damaged in the post ask for recorded or Insured delivery.

I always get a receipt for postage and cannot be held responsible for missing items or items damaged in transit, although I will do my best to be helpful. I do sometimes use recycled packaging but all items are well packed and in good order when dispatched

My feedback can only tell the truth I always keep proof of posting receipts so if your item gets lost in the post i will send you this receipt so you can claim from the royal mail directly. I will back you up in such a claim and if for any reason you are not 100% happy with your purchase please just contact me and i will be more than happy to sort your problems out thank you.  

Related products